ColorStar

Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere you want to provide an indoor non-slip application to customers/visitors or employees.

2' x 3' (24" x 35")
3' x 4' (35" x 47")
3' x 5' (35" x 59")
3' x 6' (35" x 69")
3' x 8' (35" x 95")
3' x 10' (35" x 119")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
4' x 10' (45" x 119")
5' x 8' (58" x 95")
5' x 10' (58" x 119")
5' x 12' (58" x 143")
6' x 8' (68" x 95")
6' x 10' (68" x 119")
6' x 12' (68" x 143")

Custom sizes are available in widths of 3'( 35"), 4' (45"), 5'(58") and 6' (68") with lengths up to 40'.

Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

SURFACE
Material: PET (polyethylene terephthalate) printed/disperse-dyed yarn - contains 100% recycled content reclaimed from plastic
Weight: 23 ounces/yard²
Construction: Cut pile
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard²)

BACKING

Material: Rubber (with 20% recycled content) - smooth or universal cleated
Thickness: 48-mil (body thickness 48-mil; border thickness 90-mil)

OVERALL MAT THICKNESS: 3/8 inch (0.375")

STANDARDS & TESTING

• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard DOC FF1-70
• AATCC Stain Resistance Pile Floor Covering: Grade 10, no staining
• ESD rating of anti-static
  

ColorStar mats can be cleaned in several different ways.

• They can be commercially laundered (see Laundering Instructions)
• Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
• Cleaned with an extractor, or hosed off as necessary to remove heavy soil. 
• Hang to dry.

Mats should always be dry before they are placed back in service.

ColorStar mats that are backed with nitrile rubber can be commercially laundered.  Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.  ColorStar mats are manufactured using PET Yarn.  PET is a type of polyester that needs to be processed using the proper chemistry to obtain optimal results. When PET products are exposed to oils, the yarn has an affinity to retain these oils.  We would recommend starting with 2 oz. of detergent per cwt., and 1 oz. of alkali per cwt.  The level of chemicals required will depend on the type of accounts you service.  Please consult with your chemical supplier if you have additional questions or concerns.   

1. Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
2. Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
3. Break 5-10 minutes, high water level, 120 degrees F (49? degrees C)
4. Rinse 2 minutes, high water level, cold
5. Rinse 2 minutes, high water level, cold
6. Extract (low speed) 1-2 minutes
7. Shake out (rotate wheel at wash speed with drain open) 1 minute
8. Extract (high speed max - 250 Gs) 3-5 minutes
9. Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
10. Cool down 5 minutes
11. Lay mats flat following removal from washer or dryer. Allow to cool before rolling.

For heavy soil mats, increase temperature to max 140 degrees F (60 degrees C).Break should not exceed pH of 9.5; use low pH non-ionic detergents. Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C).If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.